Mon 536 uniden ne garde plus l heure je le remets a nouveau en temps je ferme puis ouvre et oups plus rien je remets heure et date chaque fois que j ouvre quelqu un a-t-il déjà rencontrer se problème
Je viens de vérifier sur internet et il y aurait une pile interne pour conserver l'heure.
C'est écrit de laisser le scanner ouvert durant au moins 50 heures pour recharger cette pile interne.
C'est aussi écrit ceci (en anglais) :
However, it is obvious that the RTC battery requires a certain minimum 'on time' for the scanner to simply maintain the charge level in the RTC battery, let-alone charge it.
If any users, but particularly those with BCD536HP's installed into vehicles, are not leaving their scanners on for that minimum on time (likely at least 2 hours a day), then the RTC battery will inevitably discharge and fail again, which will then require further 50hr charge cycles. For anyone other than professional users, who monitor their scanner for >2 hours a day, the RTC issue could be an ongoing problem.
The fact that it takes 50 hours to fully charge a 5-10mAh SMD button cell, shows just how low the charge rate must be in these devices.
J'espère que ces informations vont t'aider.